World Visionus Programs

Building a better world for children

How Do You Make A Concrete Handprint

To make a concrete handprint, you’ll need a few supplies. First, you’ll need some concrete mix. You can find this at your local hardware store.

Next, you’ll need a bucket to mix the concrete in, and a handprint mold. You can find these molds at craft stores. Finally, you’ll need a trowel to spread the concrete.

Once you have your supplies, mix the concrete according to the package directions. Then, scoop some concrete into the handprint mold. Use the trowel to spread it out evenly.

Then, press your hand into the mold. Make sure to press evenly so that your handprint is an even depth. Let the concrete handprint dry overnight.

Then, carefully remove it from the mold. You may need to tap the mold lightly with a hammer to release the handprint. You can then display your handprint proudly!

Assuming you would like a tutorial on how to make a concrete handprint: You will need the following materials: -One part cement to two parts sand

-Water -A bowl or bucket -A mold of some sort (You can use a bowl, bucket, or even your own hand!)

-A small spade or trowel Instructions: 1)Mix the cement and sand together in the bowl or bucket, adding water until it reaches a consistency similar to pancake batter.

2)Scoop some of the mixture into the mold, using the trowel to smooth it out. Make sure the mixture is thick enough that it won’t collapse when you remove the mold. 3)Carefully remove the mold, being sure not to disturb the shape of the handprint.

4)Allow the handprint to dry overnight. There you have it! Your very own concrete handprint to remember this moment by.

how do you make a concrete handprint


What kind of concrete is used for handprints?

There are many different types of concrete, and the kind that is used for handprints depends on the project. For example, if you are creating a concrete sculpture, you would use a different type of concrete than if you were pouring a concrete foundation for a house. The most common type of concrete is Portland cement concrete, which is made with Portland cement, water, and aggregate (such as sand and gravel).

This type of concrete is strong and durable, making it a good choice for many construction projects. Another type of concrete is fiber-reinforced concrete, which is made with Portland cement and water, but also includes fibers (such as glass or carbon) for added strength. This type of concrete is often used in projects where high strength is required, such as bridges or parking garages.

Still another type of concrete is pervious concrete, which is made with Portland cement, water, and aggregate, but has a high porosity (or “openness”). This type of concrete is used in projects where water drainage is important, such as in parking lots or stormwater management systems. No matter what type of concrete is used, it is important to cure it properly so that it reaches its full strength.

Curing concrete involves keeping it moist and warm for a period of time after it has been placed, so that the chemical reaction that makes concrete hard can continue.

What kind of cement do you use to make stepping stones?

When it comes to cement, there are a few different types that can be used to make stepping stones. The most common type of cement is Portland cement, which is made from a mixture of limestone and clay. This type of cement is strong and durable, making it a good choice for stepping stones.

Another type of cement that can be used is mortar cement, which is made from a mixture of sand, lime, and water. This type of cement is not as strong as Portland cement, but it is still a good choice for stepping stones.

How do you make a handprint mold?

When it comes to making a handprint mold, there are a few things that you will need to do in order to get started. First, you will need to gather up some supplies. This includes a non-toxic molding material, something to use as a base (such as a piece of cardboard), and something to use as a release agent (such as petroleum jelly).

Next, you will need to prepare your work area. This means making sure that it is clean and free of any debris. Once you have done this, you are ready to begin.

To start, you will need to mix together your molding material according to the instructions on the package. Once it is mixed, you will then need to take your release agent and apply it to your hand. This will help to prevent the molding material from sticking to your skin.

Once your hand is coated, you will then need to press it into the center of your base. You will want to make sure that you press it down firmly so that you get a good imprint. Once you have done this, you will then need to wait for the molding material to dry.

This usually takes a few hours, but depending on the material that you are using, it could take up to 24 hours. Once it is dry, you will then need to gently peel it away from your hand.

How do you make custom stepping stones?

Assuming you would like a tutorial on creating custom stepping stones, here are the supplies and instructions you will need: Supplies: -Concrete

-Mold (you can use just about anything as a mold as long as it is the shape and size you want your stepping stone to be, and can hold the concrete without leaking) -Trowel -Water

-Concrete Colorant (optional) -Concrete Sealer (optional) Instructions:

1. Begin by mixing your concrete. You can do this by hand or in a wheelbarrow. If you are using a colorant, mix this in with the dry concrete mix before adding water.

2. Once the concrete is mixed, slowly add water until the mix is the consistency of oatmeal – not too dry and not too wet. 3. Next, fill your mold with the concrete mixture, using your trowel to pack it in well and smooth the top. 4. Allow the mold to sit for 24 hours so that the concrete can set.

5. After 24 hours, gently remove the mold to reveal your custom stepping stone. If desired, you can now apply a concrete sealer.

How to Make Handprint Stepping Stones | FUN DIY with Kids

Cement handprint ideas

One of the most unique and memorable ways to decorate your home is with cement handprints. This decorative technique is easy to do and can be customized to fit your own personal style. Here are a few ideas to get you started:

1. Use different colors of paint to create a multi-colored handprint. 2. Create a handprint wreath by attaching handprints around a circular frame. 3. Make a handprint-shaped mirror by covering a mirror with cement and then adding handprints.

4. Use handprints to create a border around a door or window. 5. Make a cement handprint stepping stone for your garden. 6. Add handprints to a plain concrete wall to create a work of art.

7. Use handprints to create a unique piece of furniture, such as a coffee table or end table. 8. Make a handprint-shaped birdbath for your backyard. 9. Add handprints to a cement floor to create a one-of-a-kind design.

10. Create a handprint-themed piece of jewelry, such as a necklace or bracelet. With a little creativity, you can use cement handprints to decorate your home in a truly unique way.

Best concrete mix for handprints

If you’re looking to make a concrete handprint, you’ll want to use a mix that is easy to work with and won’t set too quickly. A good mix to use is 1 part cement to 2 parts sand to 3 parts gravel. This mix will be easy to mold and will set in about 30 minutes.

Cement handprint kit

Looking for a fun and easy craft project for the kids? Look no further than this cement handprint kit! This project is perfect for kids of all ages and can be done in just a few simple steps.

What You’ll Need: -1 package of quick-setting cement -1 bucket or bowl

-Water -A mold or container to pour the cement into -A small handprint or footprint

Instructions: 1. Begin by mixing the cement according to the package directions. 2. Once the cement is mixed, pour it into the bucket or bowl.

3. Carefully place the handprint or footprint into the cement. 4. Allow the cement to set for the amount of time specified on the package. 5. Once the cement is set, carefully remove the handprint or footprint.

6. Allow the cement handprint or footprint to dry completely before displaying or using it. And that’s all there is to it! This simple cement handprint kit makes for a fun and easy craft project that the kids will love.

Diy handprint stone kit instructions

Making your own handprint stone is a fun and easy way to create a lasting memory of your child. All you need is some clay, a rolling pin, and a few simple tools. Roll out the clay on a flat surface.

Use the rolling pin to roll the clay flat, making it about 1/4 inch thick. Use a cookie cutter or other sharp object to cut out a handprint shape from the clay. Make sure to press firmly so that the handprint is deeply imprinted into the clay.

Use a straw or other pointed object to make a hole in the top of the handprint. This will be used to thread a string or ribbon through later. Bake the clay handprint in a preheated oven at 200 degrees Fahrenheit for 30 minutes.

Allow the handprint to cool completely before adding paint or a sealant. Paint the handprint with your child’s favorite color. You can also add a clear sealant to protect the handprint.

Thread a string or ribbon through the hole in the top of the handprint. Hang the handprint on a wall or in a window to enjoy your child’s handprint for years to come!


First, you need to gather some supplies. You’ll need a bucket, some sand, some gravel, some cement, and some water. mix the sand, gravel, and cement together in the bucket, and add water until it’s the consistency of pancake batter.

Then, find a place to put your handprint. You can use a piece of cardboard or a piece of wood. Dip your hand into the batter and then press it down onto the surface.

wait a few minutes for it to dry, and then remove your hand. You should have a perfect handprint in the cement!

Leave a Reply

Your email address will not be published.